K5000 MIDI cheat sheet egw 2000
midi cc received
1 modulation
5 portamento time
7 volume
10 pan
11 expression
16 harmonics lo, GC#1
17 harmonics hi, GC#2
18 FF bias, GC#3
19 FF speed, GC#4
64 sustain
65 portamento on/off
69 hold 2
71 E/O harmonics
72 release time
73 attack time
74 cutoff
75 FF depth
76 velocity
77 resonance
78 decay
80-83 user 1-4, GC#5-8
84 portamento control
121 reset controllers
123 all notes off
macro and effects controllers (assignable per single)
user 1 cc#80 two destinations in table CD
user 2 cc#81
user 3 cc#82
user 4 cc#83
effects source 1 (from AS) one effects destination in table ED
effects source 2 (from AS)
table CD: controller destinations
pitch velocity offset
cutoff resonance
level panpot
vibrato depth FF bias
growl depth FF env LFO depth
tremolo depth FF env LFO speed
LFO speed harmonics lo
attack time harmonics hi
decay time harmonics even
release time harmonics odd
table AS: assignable sources
pitch bend
aftertouch
mod wheel cc#1
expression cc#11
volume cc#7
pan cc#10
GC#1-8 (cc#16-19,80-83)
table ED: effects destinations
E1 dry / wet
E1 param
E2 dry / wet
E2 param
E3 dry / wet
E3 param
E4 dry / wet
E4 param
rev dry / wet 1
rev dry / wet 2
controllers (assignable per source/part)
aftertouch two destinations in table CD
mod wheel cc#1
expression cc#11
assignable 1 (from AS) one destination in table CD
assignable 2 (from AS)
bank select received
bank A cc#0 val=100, cc#32 val=0, pc
bank D cc#0 val=102, cc#32 val=0, pc
multi cc#0 val=101, cc#32 val=0, pc
velocity destinations
pitch envelope amt
pitch envelope time
DCF cutoff
DCF filter envelope
DCF attack time
DCF decay 1 time
DCA amp envelope amt
DCA attack time
DCA decay 1 time
release time
soft/loud harm crossfade
FF envelope depth
switch destinations (common)
single (refer to table SD)
arpeggio on / off
octave up
octave down
RPN received
  MSB cc#101 LSB cc#100 data cc#6
pitch bend range 00H 00H 00-18H semitones
coarse tuning 00H 02H 28-58H 40H=A440
table SD: switch destinations (single)
harm max add even
harm bright HE #1
harm dark HE #2
harm saw HE loop
select loud FF max
add oct FF comb 1
add 5th FF hi cut
add odd FF comb 2
NRPN received
switches MSB cc#99 LSB cc#98 data cc#6
SW1 20H 40H 0=off,64=on
SW2 20H 41H 0=off,64=on
FSW1 20H 42H 0=off,64=on
FSW2 20H 43H 0=off,64=on
reset controllers
pitch bend center expression max
aftertouch off RPN, NRPN disable
modulation off